Concrete patio construction in Perris CA - a level patio with joints in the right places
Bare dirt out back, or an old patio cracked and sinking? We pour a level new one with a finish that fits how you use it.
- Licensed and insured.
- Free quotes on site.
- We respond within 1 business day.
What goes into building a concrete patio in Perris?
Concrete patio construction in Perris means we dig out and pack the base, set the forms, then pour, place and finish a flat slab that gives your yard a lasting surface to walk, sit and eat on.
Most patio calls start one of two ways, with bare dirt behind the house or an old slab that's cracked, sunk or flaking on top. The price moves with the size, how much old concrete has to come out first, the finish you pick and how hard it is to get concrete to the back yard. The schedule turns on whether your job needs a permit and on a good day to pour, plus the curing wait before you put furniture back. My written estimate lists each of those lines, so you can see what's in it and what isn't before you decide.
How can you tell your patio needs replacing?
Cracks that keep spreading
Cracks that wander across the slab instead of following straight lines usually mean the joints were skipped or cut too late. The longer you wait, the more the pieces shift apart and turn into trip edges.
Sections sunk or tilted
When one part of the patio sits lower than the rest, the base under it was usually just raked flat and never dug out and packed, so it settled. Once a slab is tipping, patches rarely hold, and the edge catches feet and chair legs.
Top chipping or dusting
A surface that flakes, chips or leaves powder on your shoes often comes from a pour in midday heat or a slab that dried out too fast. It keeps wearing down, and paint or coatings put over it tend to peel.
How we build a concrete patio
I measure the space and check the grade and layout first, then we dig out and pack the base, the layer the slab sits on, because a base that's only raked flat settles with the dirt under it. We set the forms and check them before the truck comes. We talk through the finish with you, since a smooth surface looks clean but a broom finish, a light texture dragged across the wet concrete, grips better once the patio gets wet. I mark the control joints on your plan ahead of time so you can see them, because those planned cuts give the slab a place to crack that we chose. Then we pour, place and finish, cut the joints on time, let it cure, which is the wait while the concrete gains strength before you use it, and clean up. A fancy finish shows on day one and the base doesn't, so the base is the first thing people want to cut, and it's the one thing I won't. You can add a border or a step later, but nobody can get back under a finished slab to fix what it sits on.
Patios often come with other work. If you want a pattern pressed into the surface, that's our stamped concrete services. If you need a walk from the driveway or side gate out to the new patio, we can pour it with concrete sidewalk building on the same job, with a joint between the two of the kind that separates a patio from a walk, a wall or a step so each can move on its own.
New patio on open ground
This suits a yard that's bare dirt or tired grass where you want a usable surface outside the back door. We start with the dig-out and the base, so the size and shape are yours to choose.
Tear-out and replacement
This is for an old patio that's cracked, sunk or crumbling on top. We break it out and haul it off, then rebuild the base before pouring new, because pouring over a failed slab carries its problems into the new one.
Stamped patio
This suits owners who want the look of stone or brick in a single pour. With stamped concrete the sealer on top is what usually wears first, not the concrete, so plan on resealing it over the years.
Get a written patio estimate from the owner
Send the form and we'll reply within one business day to set a time. I come out, measure and give you a free written estimate, line by line, with no obligation to go ahead.
(951) 418-3042- Based in
- Perris, CA 92570
- Hours
- Mon–Fri: 8 AM–9 PM, Sat–Sun: 6 AM–9 PM
What happens after you call about a patio in Perris?
From the first call to pour day, here's who does what, so you know when I'll be there and what you'll have in hand before work starts.
Call or send the form
You tell us roughly what you want, and we set a time for me to come out. At the visit I measure, ask how you'll use the patio and check the grade and layout of the yard.
Get your itemized written estimate
Your estimate spells out each part of the job, so you know exactly what you're paying for before you agree to anything. If your patio needs a permit, we sort that out before we set a pour date.
Pour day with me on site
I'm there with our crew, and we check the forms, the base and the joint layout before the concrete arrives. Once it's finished and the joints are cut, we clean up and tell you how long to keep off it.
Why Perris homeowners call Prime Perris Concrete for patios
The owner writes your estimate
I come out myself to measure and write the estimate, and I'm on site with our crew on pour day. You deal with the person who answers for the work from the first visit to cleanup.
Commercial habits, Perris business since 2020
I learned on commercial jobs where every form got checked against the plans before a truck rolled in, and I started this business in Perris in 2020 to bring that habit to homes. Six years on, we still check grade and layout before every pour, because concrete doesn't give you a second try.
Licensed and insured in California
We're licensed and insured, and California's concrete contractor license covers forming, pouring and finishing flat work like a patio. When a licensed contractor takes out a Perris permit, the city wants the license pocket card and a workers' comp certificate, so it's fair to ask any bidder for both early.
The part of a patio that decides how it holds up is the part you can't see once it's poured, so send us the form or call (951) 418-3042 and I'll come out and measure.
Building patios in Perris: permits and backyards
Permits in Perris come from the City of Perris Building and Safety Division at 135 N. "D" Street, (951) 443-1029, and its staff list what's required when a permit is issued. Whether your particular patio needs one is worth confirming with the city before you plan around a date, and we can make that call with you. When a job needs a permit, we take it out and handle the paperwork with the city, or with the county office if your house sits in an unincorporated area.
Around Perris, a lot of our patio calls come from tract homes with a small slab outside the back door that the family has outgrown, or an older patio that's cracked and settled. We see the same yards on jobs in Menifee and Moreno Valley, and the work starts the same way, with the old concrete out and a packed base in before anything new goes down.
Questions about concrete patios in Perris
How much does a concrete patio cost in Perris, CA?
An installed concrete slab in the Inland Empire usually costs about $10 to $14 per square foot, and that's the going rate in the area, not our quote. Tear-out of an old patio, a stamped finish and a back yard that's hard to reach push a job higher. Your own number comes from the written estimate after I measure.
What is the best finish for a concrete patio people walk on?
A broom finish is the usual pick for a patio people walk on, because its texture grips, while a smooth troweled finish looks cleaner but can get slick when wet. Smooth can make sense on a small or covered spot that doesn't see much foot traffic. On a busy family patio, grip usually comes ahead of looks.
Will my new concrete patio crack?
No one can promise concrete won't crack at all, but well-designed joints control cracking and keep it to a minimum. The joints give the slab planned lines to crack along instead of random breaks across the middle. When you compare bids, ask each crew where the joints will go.
Can I pull my own patio permit in Perris as the homeowner?
Yes, a Perris property owner can take out the permit by completing and signing the city's Owner/Builder Letter and Verification Form. If you'd rather hold the permit yourself, we'll tell you early what we need from you so the dates don't slip.
How do I keep a new concrete patio from drying out too fast in summer?
Ask your crew how they'll protect the slab from losing moisture while it's placed and while it cures, which is what national hot-weather guidance for concrete suggests. Heat trouble with fresh concrete can show up any time of year but mostly hits in summer, so crews may schedule a summer pour for a better time of day or night. Heat and dry air hit fresh concrete harder as the wind picks up, so a breezy forecast is worth raising before pour day.
Can I hire someone without a license to pour a patio in California?
Only for very small jobs, because California lets an unlicensed person do minor work up to $1,000, and only when the job needs no permit and that person has no one working for them. State contractor law also counts building or replacing a patio at a home as home improvement work. Past that limit, the job calls for a licensed contractor.
Concrete work that pairs with a new patio
Stamped concrete services
Worth a look if a plain gray slab feels too bare and you want a pattern or color that dresses up the yard where you'll spend evenings.
Concrete sidewalk building
Useful when your new patio needs a solid path to the driveway, side gate or front door so people stop cutting across dirt or grass to reach it.
Patio service areas around Perris
Prime Perris Concrete is based in Perris, CA, and pours patios across western Riverside County, in city limits and unincorporated areas alike. The 12 areas below each have their own page, including Murrieta and Lake Elsinore.
Perris, CA
Book a measure for your new patio
Have the rough size, the finish you have in mind and a few yard photos ready when you call, and we can talk real options in the first conversation.