Prime Perris ConcretePrime Perris Concrete

Concrete Contractor in Mead Valley, CA - Level Slabs That Drain Away From Your House

Prime Perris Concrete is a concrete contractor based in Perris, CA. We pour driveways, patios, slabs, footings and foundations in Mead Valley, and we check forms, base and grade before the truck arrives.

Decorative stamped concrete patio with an irregular tan stone pattern beneath a covered brick-house porch.
  • Licensed and insured.
  • Free quotes on site.
  • We respond within 1 business day.

Mead Valley homes and the ground under them

Mead Valley isn't its own city. It's an unincorporated part of Riverside County, and on our jobs here we see older houses on bigger, open lots alongside newer homes set closer together. A lot of the calls are for long driveways back from the road, pads for RVs and trailers, patios out back, and footings for a garage, shed or carport.

It's close to home for us, and we do the same kind of work in Perris and Woodcrest. What shapes most jobs here is the ground, because a slab on an open lot usually goes down on native dirt that's never been packed, so the dig-out and the base take more of the job than people expect.

Concrete work we do in Mead Valley

  • Concrete driveway building

    Long driveways on Mead Valley lots need a dug-out, packed base so the slab doesn't settle where trucks and trailers roll in.

  • Concrete patio construction

    A backyard patio here takes hard afternoon sun, so we pour early in the day and slope it away from the house to keep rain off the slider.

  • Stamped concrete services

    Stamped concrete gives a patio or walkway the look of stone or tile, and on a wide lot it's a way to dress up the area you use.

  • Concrete sidewalk building

    A walk from the driveway to the front door or out to a back gate keeps dirt and mud out of the house on lots without paved paths.

  • Garage floor concrete

    Older garage floors here are often cracked or sunk at the door. We break out the old slab, pack the base and pour a floor that drains out.

  • Decorative concrete

    Color, exposed aggregate and saw-cut patterns let a plain slab match the house, which helps on Mead Valley front entries and walks people see first.

  • Concrete retaining walls

    Where a lot slopes toward the house or the yard steps down, a concrete retaining wall holds the dirt back and gives you level ground to use.

  • Concrete floor installation

    Workshops, barns and outbuildings on larger lots need a flat, solid floor, and we set grade and base so equipment sits level and water stays out.

  • Concrete pool decks

    A pool deck here bakes all summer, so we give it a texture that grips wet feet and slope it to shed water away from the pool.

  • Concrete steps construction

    Raised porches and back doors on many homes here need steps that sit on a solid footing, with even step heights so nobody trips coming in.

  • Slab foundation building

    A new garage, workshop or room addition on your lot starts with a slab foundation, and we check layout and grade against the plans before any concrete arrives.

  • Foundation installation

    Homes, second units and larger outbuildings on open lots need a foundation built to the drawings, with forms and steel checked before we pour.

  • Concrete parking lot building

    Small businesses, churches and yards along the main roads need parking that drains and holds up to trucks, so we build the base for that load.

  • Concrete footings

    Patio covers, carports and sheds on Mead Valley lots sit on footings, and getting their depth and width right keeps them from leaning or cracking later.

  • Foundation raising

    When a slab or part of a house has sunk into soft or poorly packed fill, foundation raising brings it back toward level before the cracks spread.

  • Concrete cutting

    Adding a drain line, widening a driveway or taking out a cracked section starts with clean saw cuts, so the new concrete ties in without a ragged edge.

Get a free written estimate for your Mead Valley project

We reply within one business day to set a time, and I come out to measure and look at the drainage myself. You get a written, line-by-line estimate, free and with no obligation.

(951) 418-3042
Based in
Perris, CA 92570
Hours
Mon–Fri: 8 AM–9 PM, Sat–Sun: 6 AM–9 PM

Working in Mead Valley under county rules

Because the county runs things here, your permit comes from the Riverside County Building & Safety Department, which you can reach at (951) 955-1800. When a job needs one, the pour date waits until it's issued, so that's usually the first thing that sets the schedule. Before you hire anyone here, ask to see a California contractor's license and the county's stormwater registration for businesses, which the county requires of state-licensed contractors working in its unincorporated areas. When a permit's needed, we take it out and handle the paperwork, or if you'd rather pull it yourself as the owner, we'll tell you early what we need from you.

What moves the price here is mostly what's under the slab and around it: the size, how much soft dirt comes out and how much base goes back, any old concrete to break out, how close the truck can get, and the finish. A broom finish, a light texture dragged across the top for grip, costs less than stamped or colored work. If the job runs out to the street, like a driveway apron, working in the public road takes a separate permit from the county Transportation Department. Your written estimate lists each of these on its own line, which is how I write them up in Lake Elsinore and everywhere else we work.

What Mead Valley ground and wind do to concrete

  1. Most of the sunken driveways and cracked patios we look at here weren't bad concrete. They were poured on dirt that was raked flat instead of dug out and packed, so the subgrade, the ground the slab sits on, kept settling after the pour and took the slab with it. On open lots there's also nothing to stop runoff, and a slab that tips even slightly toward the house sends water straight to your foundation, so we check the fall before we pour. If the budget's tight, I'd cut the fancy finish before I'd cut the base, because nobody sees the base on day one, but it decides whether the slab is still flat years from now.

  2. Riverside County gets hot, dry Santa Ana winds every year, and that wind pulls water out of fresh concrete fast. A top that dries too quickly turns weak and dusty, and the slab shrinks and cracks wherever it wants. So we pour in the cool of the morning, keep the surface from drying out while it cures, which is the wait while it gains strength, and cut control joints, shallow grooves that give the slab a straight place to crack, before it picks its own.

How a concrete job runs in Mead Valley

Here's how a job runs from your first call to a finished slab, and you'll know what you're paying for before any dirt moves.

  1. Call or send the form

    Call (951) 418-3042 or send the form with a few lines about the job and where it is. We'll set a time for me to come out.

  2. I measure and check drainage

    I come out myself to measure and look at where the water goes, and it helps if you're home to tell me how you'll use the space. You get a written estimate that spells out what's in the price and what isn't, so nothing shows up later that you didn't see first.

  3. Permit first, then a date

    If the job needs a county permit, we sort that out before anything gets scheduled. We set the pour date once the permit is issued, not before.

  4. Pour day with me there

    I'm on site with our crew, and we check the forms, the packed base and the joint layout before the truck arrives. Then we finish it, cut the joints, clean up and tell you when it's ready to walk on and when you can drive on it.

Questions about concrete work in Mead Valley

Do I need a permit for a concrete driveway or patio in Mead Valley?

A slab that's part of a retaining wall, pool, garage, carport, patio cover or addition goes through a county permit, because that work is on the county's permit list. For a plain driveway or patio slab, ask the county before we set a date rather than guess, and if a permit is needed it's handled before anything is poured.

How do I know if a block wall in Mead Valley needs a permit?

Measure the planned height and confirm it with the county, because the county's own papers put the line in two places. Its building code text exempts fences up to 7 feet tall but not block walls over 4 feet, while its permit flyer lists fences over 6 feet as permit work and says to check with planning for limits. Either way, the footing is what holds a block wall up, so we size it before any block goes on.

When does a contractor need a state license in California?

A contractor needs a California license when the project needs a building permit, uses any additional workers, or when labor and materials add up to $1,000 or more across one or more contracts. Almost any driveway, patio or footing job crosses at least one of those lines. We're licensed and insured.

Which building code applies to a permit application in Riverside County?

Applications the county receives, or that weren't complete yet, on or after January 1, 2026 follow the 2025 California Building Codes, so a permit filed for your job now falls under them. The county adopts that code with some local changes of its own, and the forms, footings and steel we set are built to the plans the county approves.

How much does a new concrete driveway cost in Mead Valley?

I can't give you an honest number until I've seen the lot, because on a Mead Valley driveway the dirt work under the slab often moves the price more than the concrete does. A long run back from the road, a soft spot that needs extra base or an old driveway to break out adds to it, and a short broom-finished pad on firm ground costs less.

What causes new concrete to crack in Mead Valley, and can it be prevented?

Concrete shrinks as it dries, so some cracking is normal, and the aim is to make it crack in the control joints instead of across the middle of your slab. The cracks that ruin a driveway usually come from a soft base, a pour in the midday heat or joints cut too late, which is why we deal with all three before and on pour day.

Perris, CA

Tell us about your Mead Valley project

Describe the job when you call or write, and I'll bring the permit questions for your lot to the visit so we can sort them out on site.