Concrete Contractor in Murrieta, CA - Slabs that stay level and drain right
Prime Perris Concrete pours driveways, patios, walkways, slabs and footings for homes and small properties in Murrieta, CA. We set the grade, pack the base and lay out the joints so the concrete sheds water and holds up.
- Licensed and insured.
- Free quotes on site.
- We respond within 1 business day.
Murrieta homes, yards and the work they call for
Murrieta sits just down I-215 from Menifee, and I-215 and I-15 split it into East, Central and West Murrieta, the same way the city's own maps do. We work in all three. Most calls here come from homeowners with a cracked driveway, a patio that's dropped at the house or a side yard they want paved, and small property owners call us for parking areas and footings.
A lot of the housing is subdivision homes on graded lots, many with sloped or terraced back yards. That shapes every job here, because a graded lot can hide soft fill under an old slab and a slope decides where the water goes, so we dig and check grade before we set a single form.
Concrete work we do on Murrieta properties
Concrete driveway building
Driveways on Murrieta tract homes often crack across the middle or sink at the garage. We dig out, pack a fresh base and plan the joints.
Concrete patio construction
A back patio that's dropped toward the house sends water at your foundation. We pour the new one on a packed base, sloped away from your walls.
Stamped concrete services
Stamped concrete gives a Murrieta patio or entry the look of stone or pavers in one slab, without loose pieces that shift on a sloped yard.
Concrete sidewalk building
Side-yard walkways and front paths here often heave or settle where the base was skimped. We rebuild them on packed ground, pitched so water runs off.
Garage floor concrete
Garage slabs on Murrieta homes crack, chip and stain under years of parked cars. We replace the worn floor and pitch it toward the door so water runs out.
Decorative concrete
Colored concrete, exposed aggregate and borders let a front walk or patio match a Murrieta home's stucco and trim. Underneath, the base gets the same prep.
Concrete retaining walls
Sloped yards here often need a wall to hold a level pad for a patio or play area. We build them on footings with drainage behind.
Concrete floor installation
Interior slabs for additions, workshops and converted spaces need to come out flat for the flooring on top. We check forms and grade before the truck arrives.
Concrete pool decks
Murrieta backyard pool decks take splash-out, bare feet and chemicals daily. We finish them with grip and pitch the deck away from the pool edge.
Concrete steps construction
Front entries and sloped side yards here often need steps that stay even. We form each step the same height so nobody catches a toe.
Slab foundation building
Slabs for additions, detached garages and backyard units carry a building, so we set forms and steel to the plans and check them before the pour.
Foundation installation
Foundations for additions and outbuildings on sloped Murrieta lots often have to step down with the ground. We dig, form and pour them to the plans.
Concrete parking lot building
Small business and office lots in Murrieta need slabs that carry daily traffic and drain to the right inlets. We grade, form and pour to the site plan.
Concrete footings
Patio covers, block walls and posts need footings dug to the right depth and width. We dig, set steel and check every hole before the concrete goes in.
Foundation raising
When part of a slab or foundation has settled and doors stick or cracks open, we look at what moved and why before raising it back into line.
Concrete cutting
Cutting lets us take out a cracked section, open a slab for plumbing or widen a driveway without tearing out the whole thing.
Get a free written estimate for your Murrieta job
We reply within one business day to set a time. I come out, measure and look at where the water goes, then you get a free written estimate, line by line, with no obligation.
(951) 418-3042- Based in
- Perris, CA 92570
- Hours
- Mon–Fri: 8 AM–9 PM, Sat–Sun: 6 AM–9 PM
What a Murrieta job involves before the pour
Permits here go through the city's Building and Safety Division, and the city asks you to confirm the property is inside Murrieta before anyone applies, so that's the first thing I check. A job that needs a permit doesn't get a pour date until the city has reviewed it. Every permit application has to list the contractor's state contractor license and Murrieta business license with their expiration dates, and the city requires that business license to work inside its limits, so ask any contractor you're weighing for both. We're licensed and insured.
We take out the permit and handle the paperwork with the city, and if you'd rather pull it yourself as the owner, I'll tell you early what I need from you. Price turns on the size and thickness of the slab, how much old concrete and soft dirt has to come out, whether the truck can reach the spot from the street and the finish you choose. The schedule turns on the permit and on curing, the days the slab needs to harden before it takes feet and then tires. Your estimate lists each of those on its own line, the same way we write them up in Mead Valley and the other cities around Perris.
Settling slabs and sloped yards around Murrieta homes
Most of the cracked driveways and sunken patios we see here trace back to the subgrade, the ground the slab sits on. On a lot of tract homes that dirt was raked flat instead of dug out and packed, so it kept settling after the concrete went down and the slab went with it. We dig out the soft material, bring in base rock and compact it in layers before we pour, because no finish on top will save a slab that's sinking underneath.
The other thing we see is water running the wrong way. On sloped and terraced yards an old patio often falls back toward the house, so water sits against the wall every time the yard drains. I check the fall before we set a form, and if the yard needs a wall to hold a flat pad, we plan it with the drainage on the same visit.
How a Murrieta concrete job runs, start to finish
Here's how a Murrieta job goes from your first call to the day you can use the new concrete.
Call or send the form
Call (951) 418-3042 or send the form with your address and what you want poured, and we'll set a time for me to come out. It helps if you're home so you can walk the space with me.
I measure and write it up
I measure, ask how you'll use the space and look at where the water goes, then write an estimate that spells out what's in it and what isn't. You'll know what you're paying for before we start anything.
Permit first, then a date
If the job needs a permit, we sort it out before we set a date, and the city currently lists permit processing at 15 business days. That's the city's review time, so we plan your pour date around it.
Pour day, with me on site
On pour day I'm there, and we check the forms, the base and the joint layout before the truck arrives. When we finish, we tell you when it's ready for feet and when it's ready for tires.
Questions about concrete work in Murrieta
Do I need a permit for a concrete project in Murrieta, CA?
Some concrete work does, and the city's Building and Safety office decides for your job. The city requires a permit before anyone builds, enlarges, alters or repairs a building or structure, and its list of exempt work covers things like painting and fences no taller than 6 feet. When a job isn't plainly on one side or the other, we ask Building and Safety before we set a date.
Which building code applies to a new permit in Murrieta?
All new permit submittals in Murrieta fall under the 2025 California Building Codes. The city's bulletin listing permit-free work was written before those codes, so we treat it as a starting point and get a current answer from Building and Safety.
Does a retaining wall in Murrieta need a permit?
The city's bulletin lists a retaining wall no more than 4 feet tall, measured from the bottom of the footing to the top of the wall, as exempt, unless it carries an added load such as a slope or a driveway above it. The same bulletin says masonry and concrete wall systems need permits and tells owners to check with Planning and Building and Safety, so we confirm your wall with the city before we dig the footing.
How do I get a grading permit in Murrieta?
Grading permits come from the city's Public Works and Engineering Division, not Building and Safety. That division also reviews plans for outdoor site work and issues permits for streets, storm drains and work in the public right of way, so a driveway that ties into the street can bring it into the job. I'll tell you at the estimate if your project reaches that far.
How much does a concrete driveway cost in Murrieta?
I can't give you an honest number until I've measured, and you'll get it in writing at the estimate. Stamping, color and exposed aggregate raise the price, and a broom finish, the light texture dragged across the top for grip, keeps it down. If the budget's tight, cut the finish and not the base, because the base is buried on day one and it's what keeps the slab from sinking.
What causes a concrete driveway to crack, and will a new one crack too?
Most cracks come from a base that settled, joints that were skipped or cut late, or a top that dried out too fast during the pour. Concrete shrinks as it cures, so we cut control joints, straight grooves that give it a planned place to crack, and we time the pour so the surface doesn't dry ahead of the rest. A hairline inside a joint is normal, and a crack wandering across the middle is what all that prep is there to stop.
Perris, CA
Tell us about your Murrieta project
Call (951) 418-3042 or send the form with your address and what you want poured, and I'll know before I come out whether a permit is likely part of your schedule.