Concrete Floor Installation in Perris CA - a level slab ready for what goes on top
Old floor cracked, uneven or lifting your flooring? We pour a new concrete floor that sits level and suits the covering you choose.
- Licensed and insured.
- Free quotes on site.
- We respond within 1 business day.
What does it take to put in a new concrete floor in Perris?
Concrete floor installation in Perris means forming, pouring and finishing a new flat slab for a garage, shop, addition or room, built level and planned around the flooring you'll put on top.
Most people call us because an old floor has cracked or settled, or because they're closing in a garage floor or adding a room and need a slab flat enough for tile, wood or vinyl. The price mostly turns on the size in square feet, how much digging and base work it takes to get a firm bed under it, whether you want steel in it, the moisture barrier and how easy it is to get concrete to the spot. The schedule turns on a permit if the job needs one, the base work, the weather on pour day and the wait before you can use the floor. I come out and measure, and your written estimate spells out what's in the price and what isn't before anything gets poured.
How do you know your concrete floor needs replacing?
Cracks that keep widening
A hairline crack is normal in concrete, but one that opens wider each season or steps up on one side usually means the ground under it has moved. Waiting lets the edges chip and break up, and a patched floor rarely sits flat enough for new flooring.
Flooring lifting or popping
Tiles that pop loose, vinyl that bubbles or glue that won't hold often point to moisture coming up through the slab. Covering it again without dealing with the moisture usually means paying for flooring twice.
Low spots and uneven edges
A dip where water sits, a lip at a joint or a floor that falls toward one wall usually means the old slab went down on dirt that was raked level instead of dug out and packed. It trips people now, and it gets worse as the ground keeps settling.
How we do concrete floor installation
Before we set a form, I ask what flooring is going on top, because tile, wood, carpet or a bare sealed floor each change how we handle the moisture barrier under the slab, and I walk you through how joints and steel each deal with cracking so you can pick what matters more to you. Then we dig out to firm ground and pack the subgrade, the layer the slab sits on, because a base that's only raked level settles with the dirt and takes the floor with it. We set the forms and check them for level and slope, lay the barrier and any rebar, the steel bars that sit inside the slab, and pour early in the day, since afternoon heat can leave a weak, dusty top. After finishing, we cut control joints, shallow grooves that give the slab a planned place to crack, and keep the concrete damp while it cures so it hardens evenly. If the budget's tight, I'll tell you to spend it on the base before any fancy finish, because nobody sees the base on day one but it's what holds the floor flat.
A new floor rarely stops at the doorway. If it meets a back door or a change in height, we can pour concrete steps at the finished level so every rise is even, and if it opens onto the yard, our concrete pool decks get the same base work outside.
Smooth troweled finish
A hard, smooth top for floors that will get tile, vinyl, wood or carpet, or stay bare and sealed. It suits rooms, additions and shops where you want a surface that's easy to sweep and mop.
Broom finish
A broom finish drags a stiff broom across the wet top to leave fine ridges that give your feet some grip. It suits garages and covered work areas that see water, oil or tracked-in dirt.
Get a free written estimate for your new floor
We reply within one business day to set a visit. I come out, measure and write your estimate line by line, and it's free with no obligation to go ahead.
(951) 418-3042- Based in
- Perris, CA 92570
- Hours
- Mon–Fri: 8 AM–9 PM, Sat–Sun: 6 AM–9 PM
What happens when you call about a concrete floor in Perris?
From your first call to pour day, here's who does what and what you'll have in hand at each point.
Call us or send the form
Call (951) 418-3042 or send the form, and we'll set a time for me to come out. It helps to know the rough square footage and what flooring you plan to put down.
I measure and look around
I measure the space, ask how you'll use it and check where water runs around it. You get a written estimate showing what's in the price and what isn't, so you know what you're paying for before we start.
Permit sorted, then a date
If the job needs a permit, we sort it out before we set a pour date, so the work doesn't stall halfway. You'll know early whether we're pulling it or you are.
Forms checked, then we pour
On pour day I'm on site, and we check the forms, the base and the joint layout before the truck arrives. When we're done, we go over when the floor is ready for feet and when it's ready for heavier loads.
Why Perris homeowners call Prime Perris Concrete for floors
I write every estimate myself
I come out to look at the job and write the estimate, and on the job I'm on site with our crew checking forms and grade before the pour. You deal with the same person from the first measurement to the last joint cut.
Licensed and insured in California
We're licensed and insured. In California, the state licensing board sets the concrete contractor license, which covers forming, pouring and finishing flat work like a new floor.
Commercial checklist habits since 2020
I learned concrete on commercial jobs where every form got checked against the plans before a truck rolled in, and we've been in business since 2020. That's why I'd rather spend an extra hour on layout than explain a puddle or a crack later.
Have your floor size and flooring plans handy, then send us the details or call (951) 418-3042 to set up a visit.
Concrete floors and the work around them in Perris
In Perris, the city's Building and Safety Division issues building permits, and whether your floor needs one depends on the job itself, so I check that during the estimate instead of guessing. When it does, we take the permit out and handle the paperwork with the city, or with the county office if you're in an unincorporated area. If you'd rather pull it yourself as the owner, we'll tell you early what we need from you.
Most floors we pour around here go into garages being closed in, shops and additions on newer tract homes, plus outbuildings on bigger lots, and summer heat means we start pours early so the top doesn't dry out before it's finished. We see the same mix of jobs in Menifee and out on the open lots of Mead Valley.
Questions about concrete floors in Perris
How much does a concrete floor cost near Perris?
A concrete slab in Riverside, California usually costs about $7 to $14 per square foot, not counting staining or stamping. Reinforced concrete runs a little more per square foot than an unreinforced pad, so your crack-control choice moves the price too. That's the going rate in the area, not our quote, and your estimate shows your own figure.
Will my new concrete floor crack?
Some cracking should be expected in any concrete floor, even with joints spaced close together, so the goal is managing cracks, not avoiding every one. Control joints decide where cracks form but not how wide they get, while properly sized and placed steel keeps cracks tight but doesn't decide where they show up. You pick which matters more, and our work is satisfaction guaranteed.
How long does a new concrete floor take before I can walk on it?
You can usually walk on a new slab within 48 hours, even though concrete takes 28 to 30 days to fully cure. To be safe, wait a week before putting heavier loads on it, like a parked car, loaded shelving or appliances.
What does the city need for a permit in Perris?
When the city issues the permit, a licensed contractor shows a state license pocket card and a workers' compensation insurance certificate. If you pull the permit yourself as the owner, you bring the city's owner-builder letter and verification form, filled out and signed.
What is the best way to keep moisture from ruining flooring on a concrete slab?
Pouring the concrete directly on a vapor retarder, the moisture barrier under the slab, gives floor coverings, adhesives and coatings the most protection. It takes extra care in planning and building, because wet fill caught above the barrier can greatly lengthen drying time, and tears or punctures let moisture into the fill underneath. Ask any crew how they protect the barrier while they work.
Can an unlicensed contractor pour a small concrete slab in California?
Only for minor work up to $1,000, and only when the job needs no permit and the person has no employees. Anything bigger, anything that needs a permit or anyone running a crew calls for a licensed contractor.
Concrete work that often goes with a new floor
Concrete pool decks
When the floor opens onto the backyard, a pool deck with a texture that grips under wet bare feet carries the same careful base work outside.
Concrete steps construction
A new floor can change the height at a doorway, and new concrete steps set to the finished level keep every rise even and safe to walk.
Concrete floor service areas around Perris
Prime Perris Concrete is based in Perris, CA, and we work in the cities around it across western Riverside County, in city limits and the unincorporated county areas too. The 12 cities below have their own pages, including Moreno Valley and Murrieta, and we pour floors in the cities around them as well.
Perris, CA
Get your new concrete floor measured and priced
Tell us the square footage and the flooring you plan to use, and we can settle the moisture barrier and steel at the first visit instead of guessing.