Concrete Contractor in Temescal Valley - Driveways and Patios Built for Sloped Lots
Prime Perris Concrete pours driveways, patios, slabs, steps and footings for homes and small properties in Temescal Valley, CA. We're a concrete contractor based in Perris, and we build slabs to sit level and drain away from the house.
- Licensed and insured.
- Free quotes on site.
- We respond within 1 business day.
Temescal Valley homes sit on graded hillside lots
Temescal Valley follows I-15 up the canyon north of Lake Elsinore. Most of the homes we work on there are newer tract houses in planned neighborhoods, with some larger lots and ranch properties along the canyon and shops and businesses near the freeway. The calls are mostly flatwork, the driveways, patios and walks that lie flat on the ground, plus walls and footings for yards that step down a slope.
Those houses sit on pads that were cut into the hillside and filled where the ground dipped, so the dirt under one end of a driveway can be different from the dirt under the other. That's why we look at the ground before we talk about finishes.
Concrete work we do on Temescal Valley properties
Concrete driveway building
Builder driveways here often settle where fill was placed. We replace the bad sections on a packed base, sloped so water runs to the street.
Concrete patio construction
Many backyards here came with a small builder patio or none. We pour larger ones that fall away from the house so water doesn't pool at the door.
Stamped concrete services
Stamped concrete can match the stone and tile looks on many newer fronts here. We lay out the joints first so they fall along the pattern lines.
Concrete sidewalk building
Side yard walks on tract lots often run tight between the house and the block wall. We form them to carry water past the foundation, not against it.
Garage floor concrete
Garage floors carry car weight and oil every day. We repour cracked floors, and shop slabs on the larger lots, with a smooth finish that's easy to sweep.
Decorative concrete
Color and texture help a new slab sit right next to the stucco and stone on newer houses here. We match them to what's already on your lot.
Concrete retaining walls
Hillside lots here often need a wall to hold a slope. We pour walls on footings with drains behind them, so water doesn't push on the wall.
Concrete floor installation
Concrete floors for additions, casitas and workshops here have to come out flat for the flooring going on top. We check grade and base before the pour.
Concrete pool decks
Pool decks behind houses here take bare feet and splash water. We slope the deck away from the pool and give it a textured finish that's less slick when wet.
Concrete steps construction
Homes set above the street on sloped lots often need steps up to the door. We form each step the same height, so none catches a foot.
Slab foundation building
Casitas, garages and additions here start with a slab foundation. We check forms, grade and rebar, the steel inside the slab, against the plans before the truck comes.
Foundation installation
Barns, workshops and detached garages on the larger lots need foundations built to the drawings. We dig, form and pour them, checking layout before the concrete arrives.
Concrete parking lot building
Shops and small businesses along the freeway need lots that drain and carry delivery trucks. We pour thicker where trucks turn and slope everything to the drains.
Concrete footings
Patio covers, block walls and gate posts here sit on footings, the buried concrete that carries the weight. We dig them down to firm soil, not loose fill.
Foundation raising
When part of a slab has dropped on settled fill, raising it can save a full tear-out. I look at it first and tell you which one fits.
Concrete cutting
Widening a builder driveway or adding a walk starts with a saw cut. We cut clean lines so old concrete breaks where we choose, not across the slab.
Get a written concrete estimate for your Temescal Valley job
We reply within one business day to set a visit. I come out, measure and write your estimate line by line, and it's free with no obligation to book.
(951) 418-3042- Based in
- Perris, CA 92570
- Hours
- Mon–Fri: 8 AM–9 PM, Sat–Sun: 6 AM–9 PM
Working in Temescal Valley under county rules
Temescal Valley is unincorporated, so permits come from the County of Riverside, and the county's Building and Safety Department is the office that issues them. The local municipal advisory council gives the county supervisor advice and issues no permits, so that's not where a permit comes from. When your job needs one, we take it out and handle the paperwork with the county, or tell you early what we need if you'd rather pull it yourself as the owner, and we only set a pour date once it's in hand. The county doesn't issue business licenses, so the license to check on any concrete contractor here is the state one from the California Contractors State License Board. We're licensed and insured.
The price here moves mostly with the ground and the access. A slab over loose fill needs more digging and packing than one on firm cut ground, a backyard patio behind a tract house can mean pumping concrete over a wall or wheeling it down a side yard, and tearing out an old slab adds hauling. Thickness, rebar and the finish you pick add the rest, whether that's a broom finish, the light texture that gives shoes and tires grip, or stamped work, and your estimate lists each one on its own line. The schedule turns on the permit and our pour calendar, and we drive over from Perris for these jobs.
Hillside lots here make the base the big job
A lot of yards here sit partly on fill, dirt pushed in to level the pad when the neighborhood was graded, and fill that wasn't packed well keeps settling under whatever sits on it. That's how a driveway ends up sinking at one corner or a patio pulls away from the house. We dig out to the subgrade, the firm ground the slab rests on, and pack new base in layers before we form. It's the part you can't see on day one and the first thing people want to cut from the budget, and I'd rather you spend there and go plainer on the finish, because a stamped slab over a soft base still cracks.
Slopes do the rest. Water coming off the hill and the roof has to get past your slab, and a patio or walk that tips toward the house sends it to the foundation, so we check where the water runs today and set the slab to fall away from the walls.
How a concrete job runs in Temescal Valley
Here's what happens from your side, from the first call to the day you can use the new slab.
Call or send the form
Call (951) 418-3042 or send the form with a few lines about the job, and we'll set a time for me to come out. You don't need measurements ready.
I measure and write it up
I measure, ask how you'll use the space and walk the lot to see where the water goes, so it helps if you're home. Your written estimate spells out what's in the price and what isn't.
Permit first, then a date
If the job needs a county permit, we take care of it before we set a pour date, so the start waits on the county's review. Once it's cleared, we book the crew and tell you the day.
Forms and base checked first
On pour day I'm on site with the crew, and we check forms, base and joint layout before the truck arrives. We finish, cut joints and clean up, then tell you when you can walk and drive on it.
Questions about concrete work in Temescal Valley
How do I find out if my concrete driveway or patio needs a permit in Temescal Valley?
Ask the county's Building and Safety Department, because the county's list of work that needs no permit covers things like painting, flooring and counter tops and doesn't name driveways or patios. The list can change, so check the current version with the department. When I come out to measure, I'll tell you what we'd ask the county, and if a permit is needed we handle it.
When does a concrete contractor need a California license?
A contractor needs a state license when labor and materials together come to $1,000 or more, when the project needs a building permit, or when they bring in other workers. Most slab jobs cross that dollar line, so ask any contractor for their state license before you sign.
How much does a new concrete patio cost in Temescal Valley?
The price comes down to size, thickness, base work, access and the finish you pick, and on lots here the base and the access move it most. A patio over loose fill needs more digging and packing, and a backyard a truck can't reach adds pumping or wheeling. Your estimate lists each item so you can see what you're paying for.
How long does new concrete take to cure before I can drive on it?
You can walk on a new driveway well before you can drive on it, because concrete keeps gaining strength for days while it cures, the slow hardening that sets how much weight it can take. We give you both dates for your slab on pour day, and keeping cars off until then is the cheapest way to protect it.
What causes new concrete to crack on hillside lots in Temescal Valley?
Most cracks in new concrete come from a soft base, missing joints or water getting under the slab, and on graded lots the base is the big one. Concrete shrinks as it dries, so we cut control joints, shallow grooves that give it a place to crack in a straight line, and we pack the base before forming. No slab is crack-proof, but those steps help keep cracks thin and in the joints.
Do I need a county permit to replace the driveway apron at the street in Temescal Valley?
If the work reaches into the public road right-of-way, the strip along the road, the business doing it gets a permit from the Riverside County Transportation Department. The apron and the walk at the street are often in that strip, so we check before we cut anything there.
Perris, CA
Tell us about your Temescal Valley project
Describe the slab and where it goes, and ask about the permit, so I come out knowing what to check on your lot.